Beadboard Kitchen Cabinets Refinishing
The Installation of Beadboard Kitchen Cabinets RefinishingBegin the process by removing doors and drawers away from the cabinets. Measure the front side of the doors and drawers then also measure exposed spots on the sides of the cabinets as well. The vertical wood pieces in front of the cabinets are also need to be measured as well. Once the measuring is done then apply the measurements on the beadboard then cut the needed pieces in the exact measurements using a table saw. In cutting the beadboard begin by cutting across the grain first then parallel to the grain for the next part. Cut large pieces at first. Once the cutting is done then attaches the beadboard to the cabinets. To attach the beadboard place wood glue on the perimeter first then simply places the beadboard there. Do not place the glue on the beadboard. Secure the beadboard further by using nails.
Final Touches of Beadboard Kitchen Cabinets DIY RefinishingOnce the beadboard is attached, there are several finishing touches to be done. Sand the edges and surfaces using 100-grit sandpaper to smooth them up and to remove loose wooden fibers. Add the desired color to the beadboard using dipped sponge. Then last thing to do is to spray two layers of aerosol lacquer in order to protect the surface of the beadboard itself.
Pictures of antique beadboard kitchen cabinets is created to be the inspiration of for you. This image was published on February 13, 2018 and published by admin this is fall into the category Furniture, the size of image is 1600 x 900 and this post has 19 related images. If you have any questions please Contact page. Hope it could inspire you, our beloved reader in mytonix.com, back to article please click Beadboard Kitchen Cabinets Refinishing.